Kaysun KMF-400 DN3, Installation Manual

Page: 14 / 20

S3 definition: S8 definition olny for 40kW:
Reserve
Night Silent mode
(Default the Factory Set)
S8 definition olny for 45kW:
Default the Factory Set
Silent mode
Reserve
S10 function definition:
Reserve
None Silent mode
S4 definition:
S11 function definition:
Static pressure mode
is 0 MPa(Default the
Factory Set)
6 - 10HP
Outdoor unit settings
Static pressure mode is low
pressure(Reserve position,
use for customized unit)
12 - 18HP
Outdoor unit settings
Static pressure mode is medium
pressure(Reserve position,
use for customized unit)
Static pressure mode is high
pressure(Reserve position,
use for customized unit)
CAUTION
Code dialing must be operated after the power supply is cut off.
S5 definition:
Heating priority mode
(Default the Factory Set)
6.7 Electric system and installation
Electric wiring Notes
1. Please use private indoor and outdoor unit power supplies.
2. Power supply should apply specialized duplexure and should
install RCCB and manual switch.
Cooling priority mode
3. Power supply, RCCB and manual switch used for a same indoor
unit should have universality.(Indoor unit power supply for the
same unit should use the same circuit and ON/OFF simultaneously,
or it could seriously affect the system service life and the unit may
fail to power on).
Number 63 & the more
operating mode first
Only respond the
heating mode
4. Consider the indoor and outdoor unit connecting wiring system
and refrigerant piping as a same system.
5. Suggest to use 3-core shield cable for outdoor unit signal wire to
decrease noise disturb, don’t use multi-core cable without shield.
6. Operate according to the relative electric national regulations.
7. Power supply wiring must be operated with a specialized person.
Only respond the
cooling mode
S6 definition:
Automatic search address
Nonautomatic search address
(The communication way of the
original digital indoor units )
Clean the indoor unit address
(Effective to automatic searching
new digital indoor unit )
S7 fdefinition:
Off Qty. setting of indoor units
(Default the Factory Set)
On Qty
.
setting of indoor units
installation manual
13