Kaysun KMF-400 DN3, Installation Manual

Page: 5 / 20

4.4 Dimension(Unit: mm)
4.3 Outdoor unit basement
1 ) Advantages of a strong and correct basement :
① Outdoor unit won’t subside
②
Outdoor unit won’t generate abnormal noise caused by improper
basement.
2)Basement types
①
Steel-frame basement
② Concrete basement(See Fig.4-6 for common practice)
Outdoor unit
Φ10 expansion bolt
Rubber anti-vibration
mounting
Concrete
foundation
C
Solid ground
or roof
Fig.4-7
A B
505
≥150mm
Fig.4-6
Points of making a basement:
① Host unit basement should be made in strong concrete ground,
See Fig 3.6 for common practice or start after field measurement
②
The basement should be completely horizontal and make sure all
the contactors can contact symmetrically.
Fig.4-8
③
Ensure the the basement supports the vertical foldings of the front
and back bottom plates directly, since its the actual bearing place.
④ Macadam base is unnecessary. But cocrete surface should be
roughed. The proportions used in mixing the concrete should be
cement 1/sand 2/ pebble 4, including Φ10reinforced rebar. Even
the surface of concrete. The edge of the basement should be
chamfered.
⑤ Drainage ditch should be arranged around the basement in order
to drainage water around the unit.
⑥ Please check endurance of the roof to ensure loading capacity
could bear the weight.
Table 4-1
Size
A B C
Model
40kW
45kW
175
225
505
555
1360
1460
4.5 Pipe connection
Gas side
Liquid side
Needle valve(Pressure inspection
and refrigerant adding)
Liquid side pipe
Connecting pipe
(Accessory)
Through-pipe hole
Through-wire hole
Fig.4-9
installation manual