Kaysun COMPAK KHP 15/190 ACS1, Owners & Installation Manual

Page: 8 / 23

Installation & Owner's Manual
5
Air inlet Air outlet
A
B
C
C
D
D
Air outlet
B
Air inlet
Air inlet
Air outlet
A
3.2 Air duct connection
1) Air outlet without duct, air inlet connects to duct.
Fig.3-3
2) Air outlet without duct, air inlet connects to duct. (A+D≤10m)
Fig.3-4
It is recommended to install unit by this way in summer that could
charge fresh air into room.
3) Air outlet connects to duct, air inlet without duct. (B+C≤10m)
Fig.3-5
It is recommended to install unit by this way in the winter where there
is other heat source in the room.
4) Duct Description
Table.3-1
Duct Round duct Rectangle duct
Other shaped
duct
Dimension
(mm)
Φ190 190X190
Refer to above
data
Straight-line
pressure drop
(Pa/m)
≤2 ≤2
Straight-line
length (m)
≤10 ≤10
Bent pressure
drop(Pa)
≤2 ≤2
Bent’s qty. ≤3 ≤3
50mm larger than
the dia. of unit
Max.22mm
Heat Pump
Water Heater
User
Water Inlet
Anode rod
Drainpipe
Barrel-drain
Expansion Tank for tank
(if required)
Upper
Condensate Outlet
Lower
Condensate Outlet
Notice:
The temperature limiting
valve is required on the
hot water usage terminal.
PTR valve
Water Outlet
Temp. Limiting
Valve
Tap Water
One Way Valve
Shut-off Valve
Anode rod