Kaysun COMPAK KHP 15/190 ACS1, Owners & Installation Manual

Page: 16 / 23

Installation & Owner's Manual
13
① ③
④ ⑨
⑦ ⑥ ⑤
②
⑧
No Icon Description
15
Timer
There are six timers can be set.
If anyone of them has been set,
will lighten the corresponding one when screen
is unlocked;
If there is none of timers has been set, it will
keep extinguished.
If timer is being set, will flash the
corresponding one with 2Hz frequency as well
lighten the timer which has been set.
16
Clock and clock setting
shows the clock.
Whenever there is any setting for clock,
will be lightened.
Fig.5-3
Any pressing of button is effective only under button and display
unlocked state.
Table.5-2
No Icon Description
①
Manually turn E-heater ON
If E-heater is OFF, follow these steps below to
manually turn it on.
Icon will flash.
Confirm manually turning E-heater on,
then E-heater is activated to heat up
water to the target temperature. After
that, if need manually turn E-heater on
again, please repeat these steps.
If E-heater is already ON, Press will lead to
show invalid icon
Invalid
on the display.
Long pressing the button for 10s then can
shift to set the temperature display unit from "F" to "C"
or from "C" to "F". The default is "C"(when it's shifted
to display "F", it still will display "C" while querying).
②
INCREASE
If screen is unlocked, corresponding value will
increase by pushing
.
● When setting temperature, press more than
1s, Temperature value will be increased continuously;
● When Setting clock/timer, press
more than
1s, Clock/timer value will be increased continuously;
● When setting vacation days, press
more than
1s, day value will be increased continuously;
On querying, check items will page up by pressing
.
No Icon Description
3.1 3.1
Set Clock
Press button for 3 sec to enter
clock setting. Then icon will
be lightened and the hour value of
clock will flash slowly.
Set the hour value of clock.
Confirm the hour setting. Then the
minute value of clock will flash slowly.
Set the minute value of clock.
Confirm the minute setting and quit
clock setting.
3.2 3.2
Set Timer
Enter timer setting.
Select timer( ~ ) which needs
to be set. The timer icon will flash
slowly if it is selected.
Confirm the selected setting timer.
Then will be lightened. Then
the hour value of timer will flash slowly.
Set the hour value of timer.
Confirm the hour value of timer. Then the
minute value of timer will flash slowly.
Set the minute value of timer.
Confirm the minute value of timer.
Then ON or OFF icon following the
setting timer will flash slowly.
Set the action(ON or OFF) of the timer.
Confirm the action(ON or OFF) of the
timer.
The display screen will automatically
display different value at
by
different action. It will display the last
set temperature and icon SET
SET, if the
action is ON, and will display if
the action is OFF.
Set the water temperature of the setting
timer.
Confirm and complete the timer. Then
repeat this process to set another timer.
ON/OFF
ON
OFF
Display
Operation
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
⑩
11
15 12 16 13 14.1 14.2
1
2
3
4
5
6
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SET
DAY
Invalid
SET CLOCK
ON
OFF
ON
OFF
VACATION CANCEL
CLOCK
TIMER
ENTER
Press 3 seconds
for lock/unlock
DISINFECT
1
2 3
4 5
6
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SET
DAY
Invalid
SET CLOCK
ON
OFF
ON
OFF
ON/OFF