EN
36
3.
Insert the steering post (6) in the bracket in the frame. Release spring pin (23), pull it out and align
with an appropriate hole for the desired height. Release the spring pin and tighten.
Assemble the handlebar (7), computer holder (49) and computer (50) with two sets of spring washer
Ø 8 (32) and screw M8 x 15 (33).
IMPORTANT: Make sure that the handlebars are tightened correctly.
4.
Screw on the pedals (9 L) and (9 R) of each crank arm (57, left marked L) and (10, right, marked R).
If these instructions are not followed, the threads on the crank arm or pedal may be damaged.
Screw on the right pedal, marked R on the right-hand crank arm, also marked R, and tighten firmly
clockwise. Screw on the left pedal, marked L on the left-hand crank arm, also marked L, and tighten
firmly anticlockwise.
9R
10
9L
1
4
