EN
55
FITTING THE FLAG
Assemble the two-piece flag pole Insert the flag pole in the sewn channel in the bike trailer’s rear
right corner
CAUTION!
Always have the flag in place on the bike trailer The bike and trailer unit is more visible in traffic when
the flag is used
EXTENDING OR COLLAPSING THE DRAWBAR
Tip the bike trailer backwards so that the front part of the chassis is visible and accessible Undo the
velcro fastening and remove the locking pin - see the figures below
Turn the drawbar upwards until it is fully extended Replace the locking pin and the retaining clip - see
figures below
When collapsing the bike trailer for storage, follow the instructions in reverse order Remember to
press the locking pin all the way in and secure it with the retaining clip Tighten the velcro strap
securely
WARNING!
The bike trailer must not be used if the locking pin is not correctly inserted
