EN
51
TYRE CARE AND WHEEL ADJUSTMENT
• In order for the bike’s tyres to function well and last a long time, it is important that they are at
the correct air pressure, which is indicated on the side of the tyre.
• Locking the brakes and skidding wear out the tyres.
• The tyres must not come into contact with oil, petrol, paraffin or other agents that dissolve rubber.
• Check that the wheels are not warped and that they are correctly aligned so that the side of the
tyre does not come into contact with the frame or front fork.
• Check also that the tyres are not worn or have cracks. Ensure that the tyre tread has not been
worn down and that there is no damage, cracks or uneven wear on the tyre. Replace a worn or
damaged tyre immediately.
• If you cycle over sharp stones, holes in the road or onto kerbstones, the tyres may puncture.
• If the bike is to be stored away for a long period, we recommend that you remove the wheels to
prevent them becoming warped.
• Pump up the tyres with a foot pump or hand pump with a suitable valve connection. Check the
pressure with a manometer.
• Check regularly that the spokes are correctly tensioned. Check often if you cycle a lot on uneven
roads.
MAINTAINING THE CHAIN
Lubricating the chain
The chain should be lubricated regularly; use a suitable chain oil. Check that the chain does not knock
when
cycling, or is damaged. Always keep the chain oiled.
1.
Lubricate the chain.
2.
Pedal a few turns so that the oil comes in the links.
3.
Wipe the chain with a cloth or sponge.
Tension the chain
A chain that is not properly tensioned can be dangerous. If the chain can be moved more than 1 cm
“up or down” it must be tensioned.
1.
Undo the nuts on the back wheel and pull the back wheel backwards.
2.
Tighten the nuts. Make sure the wheel is fitted straight.
3.
Check that the wheel is properly tightened.