vii
kayden.com Online Store
CLASSIC
®
800 Product Manual
Introduction
Thermal Dispersion
CLASSIC
™
800
1
Shop Online
Notes
Overview of CLASSIC Setup
1. Warm-up
At initial start-up or restart allow approximately 90 seconds for the heater element to warm-up and the switch to
stabilize before making any adjustments.
2. Primary Settings
The following are the basic configurations for the CLASSIC 800 Series Electronics Modules:
1.
Relay 1
2.
Relay 2
3.
Set Point 1
4.
Set Point 2
5.
Heater Power
6.
0% & 100% Thermal Signal
3. Secondary Settings
The following are the additional configurations:
1.
4-20 mA Fault Configuration
2.
Start-up Bypass Timer
3.
Node Address & Software Revision
4.
4-20 mA Configuration
