55
kayden.com Online Store
CLASSIC
®
800 Product Manual
Troubleshooting
Self-Test Error
Probe Error
Communication error between the
module and the sensor.
The sensor is not connected properly or
has a bad connection.
Confirm correct sensor resistance
measurement at sensor plug connector
to Electronics Module. If within spec, investigate sensor plug &
wiring.
Attempt FACTORY RESET. If operation
not restored replace Electronics
Module.
RCMS Fault Code
RCMS Fault Code
Description of Fault
Description of Fault
Course of Action
Course of Action
Fault Code 13
Fault Code 14
Fault Code List
Description
0%
40% - 75%
40% - 75%
Thermal Signal
0%
100%
Thermal Signal
0%
100%
No Fault code in Kayden RCMS
No Fault code in Kayden RCMS
Electronics Module malfunctioning to
start.
Electronics Module power failure.
Attempt FACTORY RESET. If operation is
not restored replace Electronics Module.
Fault may occur as the result of power supply voltage below
specified minimum (brown-out).
If FAULT LED is not illuminated, confirm
power is connected and in spec. If FAULT
LED is illuminated, attempt FACTORY RESET. If operation is not
restored, replace Electronics Module.
RCMS Fault Code
RCMS Fault Code
Description of Fault
Description of Fault
Course of Action
Course of Action
Fault Code 15
Fault Code 16
No LEDs On
100%
Thermal Signal
0%
100%
Thermal Signal
0%
100%
RCMS
= Kayden RCM Software
