TRANSPORTATION AND RELOCATION
Relocation; The device, assembled by the Authorized Service, may not be
RELOCATED by any person other than the authorized service.
ELECT
R
ICIT
Y
SUPPL
Y
CABLE MA
Y
NOT BE EXTENDED
, R
EPLACED.
☞
The device has to be located on the pallet in a vertical position using man
power.
☞
The device shall be transported by placing the forklift feet under the device.
☞
If the transportation distance is long, the staff members have to act slowly; if necessary,
the device has to be fixed onto the pallet against vibrations or its stability has to be
☞
Do not strike or drop the product during transportation.
ASSEMBLY OF THE DEV
ICE
In order to locate the device near to a wall and partition, kitchen furniture,
decorative coating etc., the said items have to be made of nonflammable
material or coated with an appropriate thermal insulation material in which
case the distance in-between has to be 5 cm or otherwise 20 cm at
minimum. It is recommended that fire protection rules are attached special
importance.
All of the below-mentioned items on assembly of the device
have to be fulfilled by the authorized service personnel.
☞
The feet of the device have to be adjustable and it has to be ensured that the device is
operable on a scale basis.
☞
Electrical connection of the device has to be checked by a qualified electrician and has to
be connected to a fuse, which is at a height of 170 cm from the ground at maximum.
☞
Electrical connection has to be made by placing a leakage current fuse of 30 mA
onto a supply fuse against leakage current risk.
☞
It has to be ensured that the device is earthed by connection of the
electrical installation of the device to the earthing bar at the closest panel.
maintained by a person.
