6 Installation of the imaging plate system
KaVo Scan eXam One
37
Connect the Ethernet cable from the unit to the
local area networking unit (router/switch). Consult
a computer network specialist to build up a local
area network if needed.
The unit can obtain an IP address automatically
(DHCP) or it can be set manually (static IP).
The unit will show its IP number during the boot up
sequence when powered on.
6.3 Install the Application software
The imaging plate system is delivered with an
software required to operate the system. In a
functional system there are two main parts: a
server for storing the patient data and images and
client software for operating the system and the
units. Both parts can be on the same computer but
there must be only one computer acting as
database server in a network. If the imaging plate
system is operated and images are viewed from
multiple PC in a network install only the client
software on the remaining other PC. The PC that is
acting as a server must be powered at any times
the system is used on any of the PC.
In addition there can be a license server in the local
area network to manage software licenses for
multiple PC.
Approved:
Reviewed: Jalkanen Joni 2017-02-13 16:00
Reviewed
See PDM system to determine the status of this document. Printed out: 2017-03-17 10:35:17
D510414, 5
Copyright © by PaloDEx Group Oy. All rights reserved.
