KaVo Scan eXam One User Manual Download Page 12

Page: 12 / 73

1 Introduction

KaVo Scan eXam One

Display and plate feeding indicators

Startup

During startup the unit serial number, IP address

and other information will appear on the unit dis-

play.

Waiting dental imaging software

Software not open, not ready or waiting for user

action.

Unit name is displayed.

Software active

Unit has a connection to a software. Unit not in

use.

Express Share reservation

The unit has been reserved using Express Share.

The workstation identifier is shown in the pad-

lock. The name of the current patient is shown.

The green plate feeding indicator is showing

readiness for plate insert.

Express Share ready

Unit has a connection to a software using Ex-

press Share.

The unit is not reserved by any workstation in the

system.

Unit is activated

The unit is activated for image processing. The

name of the current patient is shown.

The green plate feeding indicator is showing

readiness for plate insert.

Approved:

Reviewed: Jalkanen Joni 2017-02-13 16:00

Reviewed

See PDM system to determine the status of this document. Printed out: 2017-03-17 10:35:17

D510414, 5

Summary of Contents for Scan eXam One










































































Search results

Summary of Contents for Scan eXam One

Reviews:

Related manuals for Scan eXam One

Brands by name

Popular brands

KaVo Scan eXam One, User Manual

Search results

Summary of Contents for Scan eXam One

Reviews:

Related manuals for Scan eXam One

Brands by name

Popular brands