4. Plug in the connecting plug of the power supply unit into the socket
connection of the device.
5. Plug the mains plug into the power outlet.
6. Refit the cover.
NOTE
The cover on the rear must be correctly fitted when the device is
operated within the patient environment.
3.2.3 Network connections
3.2.3.1 Purpose of network connection
The network connection is used to exchange information or control signals
between the unit and a software installed on a computer, in order to, for
example:
•
Display parameters
•
Select operating modes
•
Indicate messages and error situations
•
Change unit settings
•
Activate test functions
•
Transmit data for archiving
•
Provide documents concerning the units
The unit can be connected to the network with a network cable.
3.2.3.2 Combining devices safely
•
The overall safety of the unit and its main performance features are
independent of the network
•
Incorrect manual configuration can lead to significant network problems;
the expert knowledge of a network administrator is required for
configuration
•
If, for example, the following changes are made to the network, new risks
can arise that require further analysis:
•
Changes in the IT network configuration
•
Connecting additional elements to the IT network
•
Removing elements form the IT network
•
"Update" of devices that are connected to the IT network
•
"Upgrade" of devices that are connected to the IT network
•
The data connection utilises part of the bandwidth of the network
3 Assembly
28 KaVo ProXam iP
Instructions for use
Summary of Contents for ProXam iP
Page 1: ...KaVo ProXam iP Instructions for use EN ...
Page 69: ......
