▶ For thorough cleaning or thermodisinfection, rotate the spittoon bowl and lift it
off.
The spittoon bowl made of porcelain can be subjected to thermodisinfection.
2.7
Manual reprocessing of the water-conducting system
Note
Using the "Water block, compact", a water bottle or the Water block DVGW as‐
sembly kit with integrated germ reducing facility but no intensive germ reduction
assembly kit, the water-conducting system must be rinsed manually. The auto‐
matic hygiene functions are available through the intensive germ reduction as‐
sembly kit only.
WARNING
Risk of infection if the "Water block, compact" is used without additional safe‐
guards.
Contamination of the treatment water and/or drinking water supply with germs.
▶ With regard to the "Water block, compact" assembly kit, please note that no
disinfection facility is installed in the unit, and take appropriate safeguards.
KaVo recommends to use the "Water block DVGW with integrated water dis‐
infection facility in combination with KaVo OXYGENAL 6
(Mat. no. 0.489.3451).
▶ If the Water bottle kit is used with the enclosed dosing attachment
(Mat. no. 1.002.0287), add the proper amount of KaVo OXYGENAL 6
(Mat. no. 0.489.3451) with each filling. For the correct amount, please refer
to the Instructions of the dosing attachment for water disinfection.
Manual reprocessing procedure:
▪ Before first start-up and after the device has not been used for a while (week‐
ends, holidays, vacation times, etc.)
▪ Before you start working
▪ After each patient (short rinsing programme of 20 seconds)
▶ Rinse all water outlets without handpieces for 2 minutes and actuate tumbler
filler repeatedly.
Care instructions KaVo Primus® 1058 S/TM/C
2 Setup methods according to DIN EN ISO 17664 | 2.7 Manual reprocessing of the water-conducting sys‐
tem
21/35
