Assembly instructions Everest
®
engine Base Camp 4140
7 Calibrate the Everest engine Base Camp 4140
|
7.3 Evaluate the calibration body
7.3 Evaluate the calibration body
7.3.1 Measure the calibration body
▶ Perform the following measurements with the micrometer screw
(Mat. no. 1.002.5839) and note the mark (small notch in the side of the cavity):
▶ Enter the measured values for Y
1
, Y
2
, Z
1
and Z
2
on the form.
Note
All of the values have to be entered in µm.
7.3.2 Check the active machine parameters
▶ Switch to the "INFO" menu
▶ Click the button "Version" (F2).
41/51
