Operating Manual
Original Operating Manual
7
3.2
Rotating Clamp with mounting
A Rotating Clamp consists of a clamp body (1) on which conduits (2) are mounted. Cylinders (4)
move the conduits (2), which are equipped with sliders (3). The clamp body (1) is mounted on a
flange (5) that is bolted to a rotary joint (6). There is a drive (8) on the base plate (7) consisting of a
bevel gear, gear box and hydraulic motor (9) attached. This combination is attached to the fork
carriage of the lift truck with upper (10) and lower brackets (11). A central catch (14) bolted to the
base plate (7) prevents the rotator being deflected off the fork carriage of the lift truck. The optional
side shift (12) is equipped with support rollers (13) and is bolted or welded onto the base plate (7).
3.3
Efficient equipment settings on electric vehicles
Please use our reference values for setting the lift trucks and attachments. These are
found at www.kaup.de in the
Services -> Product Support
section.
3.4
Proper use of the equipment
Arms/fork arms can be bolted onto models T450A and T490A by the operator. These can either be
simply pushed or loads can be clamped with them.
The operator is required to define proper and improper use for its bolted on arms/fork arms in
combination with the machine supplied.
