Operating Manual
Original Operating Manual
21
After 2500h / every 2000h thereafter
Change the gear box oil (Information KAUP customer service).
Yearly
Check the clearance in the rotary joint (3). (Information KAUP customer service)
As necessary
Renew worn sliders (25) by removing the hooks (29). Using suitable lifting equipment
lift the equipment off the fork carriage of the lift truck. Replace the sliders (25). During
installation pay close attention that the sliders (25) are seated correctly. Place the
equipment on the fork carriage of the lift truck and mount the hooks (29) using screws
(28).
Replace defective supporting rollers (30) in the hooks (29) by removing the screws
(28). Using suitable lifting equipment, tilt the complete equipment forwards off the fork
carriage of the lift truck and secure this position. Remove the bolts (31) in the hooks
(29), remove the defective supporting rollers (30) and replace them with new ones.
Mount the equipment with the hooks (29) using screws (28).
6.3.6 Identification plate and caution board
