Bracing and spacing
DISCLAIMER & COPYRIGHT
© Sayfa Systems. All rights reserved. E & OE. Designs, specifications and all other
data subject to Sayfa Systems intellectual property rights and disclaimer clauses.
Sayfa Systems is committed to continuous improvement and development, and
therefore reserves the right to modify designs and/or specifications etc. without prior
notice. Consequent selection and use of a product or system remains the User's sole
and ultimate responsibility.
Drawn By:
Checked:
Date:
Scale @ A4
Drawing No:
Rev:
PRODUCT
SHEET
T/ 1300 301 755
W/ sayfa.com.au
MV
CS
1/10/2013 NTS
1596
1
GW35 - Sentry Guardrail with Slats -
Installation Details
GW35 - Sentry Guardrail with Slats
PLEASE NOTE: (Wind Loads)
This SENTRY System has been engineered for wind speeds of up to
44m/s.
For Guardrail longer than 5m, the first 2m from each end requires
stanchions to be at 1000mm centres.
2000
If greater than 5m - see note below
2000
1000
1000
1000
DISCLAIMER & COPYRIGHT
© Sayfa Systems. All rights reserved. E & OE. Designs, specifications and all other
data subject to Sayfa Systems intellectual property rights and disclaimer clauses.
Sayfa Systems is committed to continuous improvement and development, and
therefore reserves the right to modify designs and/or specifications etc. without prior
notice. Consequent selection and use of a product or system remains the User's sole
and ultimate responsibility.
Drawn By:
Checked:
Date:
Scale @ A4
Drawing No:
Rev:
PRODUCT
SHEET
T/ 1300 301 755
W/ sayfa.com.au
MV
CS
1/10/2013 NTS
1596
1
GW35 - Sentry Guardrail with Slats -
Installation Details
GW35 - Sentry Guardrail with Slats
PLEASE NOTE: (Wind Loads)
This SENTRY System has been engineered for wind speeds of up to
44m/s.
For Guardrail longer than 5m, the first 2m from each end requires
stanchions to be at 1000mm centres.
2000
If greater than 5m - see note below
2000
1000
1000
1000
Wind loads
Kattsafe guardrail and walkway has been engineered for wind speeds of up to
44m/s. For guardrail longer then 5m, the first 2m from each end requires stanchions
to be at 1000mm centres.
35
Kattsafe / Guardrail / Installation manual
Copyright, trademarks and product codes are property of Kattsafe.
Patents and design registrations may apply to these products.
