7
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: 52-ANT
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 6
3.7
Carefully turn the partially assembled Ceiling Fan over
and place it on the styrofoam for final preparation
(Figure 6) .
3.8
Remove the Shipping Spacers and the Spacer
Attachment Screws from the Motor before installation of
blade assemblies (Figure 7) .
Discard the Spacers and Spacer Screws .
SPACER ATTACHMENT SCREW
SHIPPING SPACER
Figure 7
3. Ceiling Fan Assembly
(Continued)
HANGER BALL/
DOWNROD
ASSEMBLY
6 to 9
INCHES
3.6
The Fan comes with Blue, Black and White Wires that
are 42” long .
Measure up approximately 6 to 9-inches above top of
Hanger Ball/4 .5” Downrod Assembly (Figure 5) .
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires .
Figure 7
Summary of Contents for BUILDER Series
Page 22: ...22 U L Model No 52 ANT Notes ...
Page 46: ...46 No de modelo U L 52 ANT Notas ...
