Kathy Ireland BUILDER Series, Owner'S Manual

Page: 16 / 72

7.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box or Circuit
Breaker Panel .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch (located on the side of the
Switch Housing Assembly) to the opposite position, and
turn the Ceiling Fan on again (Figure 22) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
Reverse Switch Information
Season Blade Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
7.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional) . Connect the Wood Pendant (supplied)
to the 3-Speed Switch Pull Chain by sliding the
Wooden Pendant (small hole first) onto the Pull Chain
(Figure 23) . Attach the Chain Coupler to the end of the
Chain and allow the Wooden Pendant to fall down over
the Coupler .
Your Fan model is equipped with a 4-position,
3-speed Pull Chain Switch (Figure 23) . The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
7. Using Your Ceiling Fan
16
U.L. Model No.: 52-ANT
REVERSING
SWITCH
SWITCH
HOUSING
ASSEMBLY
3-SPEED SWITCH
PULL CHAIN
WOODEN PENDANT
CHAIN COUPLER
Figure 23
Figure 22
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
WARNING
!