55
Channel Search Mode
Use the
buttons to select the type of channels that are to be searched for. You have three
options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CI (Common Interface) module and a valid
Smartcard together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a network scan should be performed. If you set
the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located. These
are then stored and searched for new channels in the same way as the existing transponders. Once you
have defi ned all the settings, use the
buttons to switch to the “Start Search” selection fi eld
and confi rm the start of the search using the
button.
The following on-screen displays that appear during and in connection with the search are identical to
those for an automatic search.
Mainmenu - Channel Search
You can cancel the search at any time by pressing the
button.
Summary of Contents for UFS 946/CI+
Page 122: ...122 For your notes...
Page 123: ...123 For your notes...
