8
Product return/original packaging
Make sure that the ventilation slots on the unit are not blocked or covered in any
way. Otherwise the unit may overheat.
There is a risk of fi re!
You must not disconnect the receiver from the mains while it is in operation!
This can lead to a loss of data and corruption of the software.
Safety instructions - important notes
Please keep the original packaging in case you need to return the product at any time! The receivers
are fragile due to their construction and are only adequately protected by the original packaging. If the
receiver is not shipped correctly the guarantee/warranty on it will be voided.
Before you disconnect the receiver from the mains, you must switch it to the standby mode by pressing
the standby button (on/off) on the remote control. In standby mode, any changed or new data that
are broadcast will be saved by the receiver. As soon as the receiver is in the standby mode, it can be
disconnected from the mains at any time.
Ventilation slots on the unit
Switching the receiver off
Warning!
Channel assignment
The channels available on the satellites and transponders are subject to continual change. In such cases,
it is necessary to reset the channels as the factory preset programming corresponds to the situation on
the date of manufacture. The information for these settings can be found on the Internet or in relevant
magazines.
If the receiver's remote control is not operated for four hours the receiver automatically switches
to standby mode. Before the receiver enters standby mode you get a message that you can stop
this by pressing any button on the remote control. You can deactivate this function by selecting
“Mainmenu - Settings”, “User Defi ned Settings”, “Customize Screen Menu”.
Automatic stand-by of the receiver after four hours
Summary of Contents for UFS 946/CI+
Page 122: ...122 For your notes...
Page 123: ...123 For your notes...
