Kathrein UFS 900sw, Operating Manual

Page: 75 / 108

75
Main Menu - Search Channels
After calling up the menu you will see
the following on-screen display:
The

buttons allow you to
select different sets of parameters for
the search.
Satellite
Use the

buttons to select the satellite on which the transponder you want to search is
located. Make sure your reception system is aligned to this satellite. If you want to search several
transponders on a satellite, you should start an automatic search of the transmitting satellite.
Transponder Frequency
Use the

buttons (transponder frequency already saved) or the number pad (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought is
transmitted. At the bottom right of the screen display, the receiver shows the current signal strength and
signal quality of the selected transponder.
The “Polarisation” and “Symbol Rate” options only need to be speci fi ed if the transponder
has yet to be saved.
Polarization
Press the

buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number pad to enter the related symbol rate.
In this menu you can selectively search
a transponder for the new channels.
After completion of the search, you will
see the following on-screen display
(example):
Press the

button.