24
Connection and setup
Refer to the documentation supplied with your system for the settings for the
SCR, frequencies and any PIN assigned to the tuner. You will
fi
nd there a printed
list showing the assignment between the various SCRs and the respective
transmission frequencies. It may happen that you cannot freely select the
PIN for protection of individual frequencies; this also may be listed in the
documentation for the single-cable components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.
The individual items are selected using
the
buttons.
The changes to the current settings can
be performed using the
buttons
or the number pad.
Connected equipment
Use the
buttons to select the single cable system used in your reception system:
Either:
- KATHREIN UAS 481 (single-cable LNB),
- KATHREIN EXR 551,
- KATHREIN EXR 552,
- KATHREIN EXR 4 (Kathrein single cable matrices for four subscribers),
- KATHREIN EXR 8 (Kathrein single cable matrices for eight subscribers),
- KATHREIN EXU 908 or
- User-de
fi
ned (for all single-cable systems not covered by any of the above speci
fi
cations)
Transmission channel
Select a free available transmission channel.
Transmission frequency
If not preset by the receiver, select here one of
the free available transmission frequencies.
See example on the right (EXR 551) for assignment
of a transmission channel to a transmission
frequency.
SCR = Satellite Channel Router (transmission channel)
Summary of Contents for UFS 900sw
