Kathrein UFS 900sw, Operating Manual

Page: 55 / 108

55
Electronic Programme Guide (EPG)
“End” and use the

buttons or the number pad to select the desired recording end time. In
the next line you can also change the duration of the recording. The receiver automatically adjusts
the end time for the recording to the duration you have selected.
When all settings have been made, press the

button to save the recording settings.
The “Timer list” view can be called up at
any time in EPG by pressing the

(red)
button. The following on-screen display
appears (example):
The “Timer list” view shows you all the
recordings that are scheduled.
The

buttons allow the
recordings to be sorted into “once” or
“repeated” recordings.
The cursor (

) buttons allow you to select a recording. The

button allows you to switch over
the channels on which the recording is scheduled. The

buttons allow you to skip backwards and
forwards through the future scheduled recordings, a day at a time.
The

(red dot) button allows you to delete a recording that had been scheduled.
If there is an overlap in the scheduling
of recordings, the receiver will display
the “Timer overlap” warning shown on
the right as soon as you try to save
the recording settings.
You cannot save/schedule the recordings
until you have
fi rst resolved the timer
overlap.