Kathrein UFS 900sw, Operating Manual

Page: 27 / 108

27
During the search you will see the
following on-screen display (example):
Newly found channels are identi fi ed
with the suf fi x “New” (see screenshot
example, right).
Note:
You can cancel the search at any time by
pressing the

button.
Connection and setup
After completion of the search, you will
see the following on-screen display
(example):
Press the

button. The newly found
channels are added at the end of the
existing complete list.
Network Search
Use the

buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
When you have completed all settings, press the

(green) button. The following on-screen displays
appear (example):
Transponder = frequency converter (see Short Technical Guide)