57
Transponder Frequency
Use the
buttons or the number pad to select the transponder frequency on which the channel
being sought is transmitted. At the bottom right of the on-screen display, the receiver shows the
current signal strength and signal quality of the selected transponder.
Press the
button to move to the next selection item.
Service ID
Using the
buttons or the number pad, enter here the service ID of the channel being sought.
When you have made your settings, use the
buttons to select “Start Search” and press the
button to start searching. You can cancel the search at any time by pressing the
button.
During the search you will see an on-screen display that shows you the progress of the search.
After completion of the search, you
will see the following on-screen
display (example):
SEARCH CHANNELS (CHANNEL SEARCH)
Press the
button. You will be asked whether you want to save the changes or not. Use the
buttons to make the selection and con
fi
rm the selection with the
button. If you select “Yes, save
changes”, the newly found channels will be added to the end of the channel list. Then press the
button to exit the menu. The channel list is called up on to the TV screen by pressing the
button
(see also section “On-Screen Displays” “Channel List TV/Radio”).
Summary of Contents for UFS 641si
