Kathrein UFS 641si, Operating Manual

Page: 26 / 84

26
FIRST INSTALLATION: One Cable System
Selection “EXU 908”
Transmission channel
Use the

buttons to select a free available transmission channel. A maximum of eight
transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).
Secure channel with PIN
The EXU 908 single-cable matrix allows the transmission frequency to be protected by entering a PIN.
No other receiver can then use this transmission frequency unless the PIN is entered.
Use the

buttons to select the setting “Yes”. A line with the text “Password PIN” is then displayed.
Press the

buttons to select this line. You can now use the number buttons to enter a PIN (0-255).
Test connection
When you have set a free transmission channel, press the

buttons to switch to the “Test
connection” selection fi eld, then press the

button. The receiver now tests whether a connection to the
single-cable system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following on-screen display:
Con fi rm this on-screen display with the

button.
Then press the

button. You will be asked whether
you want to save the changes. Use the

buttons
to select “Yes, save changes” and con fi rm by pressing
the

button. Now press the

(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section
(Execute channel search).
If no connection to the single-cable system could be established, you will receive the message
“Registration was abortive!”.
Check your settings and if necessary call for expert help.
When the “EXU 908” single-
cable matrix is being used, it
is essential that the LNB is set
to “Universal”!