Kathrein UFS 641si, Operating Manual

Page: 21 / 84

21
Universal:
No further entry is required, since all necessary frequency ranges are covered by a universal LNB.
Wideband:
No further entry is necessary, since all frequency ranges are set by the wideband LNB.
Single:
If you are not using a universal or a wideband system, you must set the frequencies here. You can
fi nd
the necessary information in the documentation supplied with your system.
Use the

buttons to select the line “LNB Low Frequency”). Use the

buttons or the
numbers buttons to set the exact frequency for which your LNB was con fi gured.
When you have completed all settings for the currently selected satellite, press the

button. If you
have selected more than one satellite, repeat the previous “Satellite” and “LNB Type” processes for
the number of satellites you selected.
When you have completed the settings for all the satellites, the following on-screen display appears:
Use the

button to select the next menu item “New registration”, then press the

button.
FIRST INSTALLATION: One Cable System