Kathrein UFS 641si, Operating Manual

Page: 19 / 84

19
Satellite
Use the

buttons to select the
desired satellite whose signal is to be
received by the tuner.
When you have selected your desired
satellite, use the

buttons
to switch to the selection of the
“LNB Type”.
LNB Type
Here use the

buttons to select
the LNB type used in your system.
The choice is between “Universal” and
“user-de
fi ned”.
Universal:
No further entry is required, since
all necessary frequency ranges are
covered by a universal LNB.
User-de fi ned:
If you choose not to use a universal
LNB, you must here set the frequency
ranges for which your LNB was
con
fi gured.
Use the

buttons to select
the frequency range to be changed
(low/high frequency).
Use the

buttons or the numbers buttons to set the exact frequency for which your LNB was
con fi gured.
LNB Power
Use the

buttons to select whether your LNB is supplied with power from the receiver (“On”) or
whether it has its own power supply (“Off”).
Test transponder
To check whether the settings that you have made are correct, use the

buttons to move to the
“Test transponder” fi eld. Use the

buttons to select the required transponder from the various
ones listed. If your settings are correct, you will see at the top right of the screen the live signal
of a channel from the currently selected transponder.
If you do not receive a signal, check your settings again and if necessary call for expert help.
FIRST INSTALLATION: LNB only