Kathrein UFS 641si, Operating Manual

Page: 11 / 84

11
CONNECTION AND SETUP
Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection
Example”). If your TV has a stereo capability, you can receive the sound in stereo via the Scart
connection.
Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/DVR.
For system reasons, the same video signals are to be found at the TV Scart socket as at the video
cinch output.
If you want to play the sound on your hi- fi system, connect the audio cinch sockets to the input sockets
on the hi- fi system, using an appropriate cable (see “Connection Example”).
The electric digital output is intended for the connection of a Dolby Digital system (see “Connection
Example”).
Remove the cover on the rear of the remote control.
Insert the two batteries supplied into the remote control. Ensure correct polarity of the batteries;
the + and – markings are indicated inside the battery compartment.
Slide the cover back into the housing until it locks in place.
TV AND VCR CONNECTION
AUDIO CONNECTION
ELECTRICAL DIGITAL OUTPUT
INSERTING BATTERIES INTO THE REMOTE CONTROL
If you are recording using an external video recorder, remember not to operate
the receiver during recording, otherwise all the on-screen displays will appear
on your recording.
The mounting support supplied offers you the option not only of placing the receiver on a solid fl at
surface, but also of mounting it suspended (e.g. underneath a shelf).
INSTALLING THE UFS 641si USING THE MOUNTING SUPPORT
When selecting the mounting location, take care that it conforms to the instructions
in the chapter “Safety Instructions”! Note the need to access the connection
sockets at the rear of the receiver and allow suf
fi cient space for the cables once
connected!