Measuring SAT, TV, CATV and Optical Signals
52 von 76
①
BUZZER TON
on
/
off
②
MRK. BW
(marker bandwidth)
Bandwidth measurements and power measurements can be
activated.
OFF
ON
The bandwidth of the set signal can be meas-
ured, the signal can be viewed in the spectrum
diagram and the bandwidth value can be read in
the upper bar.
BW. PWR
(Bandwidth
power)
While measuring the signal width, the channel
power is also displayed in the lower bar:
③
MARKER
This function activates a second marker, which can be con-
trolled either by the multifunction control or by touching the
signal envelope.
Thus, differential measurements can be made at two points
of a signal or two adjacent signals (i.e. two transponders in
the same bouquet).
④
PICTURE
MAX
Analyser view in full screen.
KONTOUREN
Only contours of the signal curve are displayed.
⑤
LOC. OSC.
sets the frequency of the local oscillator
⑥
dB/DIV
changes the vertical scale of the display
⑦
RBW FILTER
TV and CATV: display only
SAT: changes the resolution bandwidth
⑧
DiSEqC
selects between DiSEqC levels (only in SAT mode)
⑨
SAVE/RECALL
This function allows you to take screenshots of the spectrum
diagram, including the top and bottom bars and the mark-
ers. With the
RECALL
function, saved screenshots can be
selected from the list of stored files and visualised.