Changing Basic Parameters
23 von 76
➯
The brightness value is changed. The
BRIGHTNESS
parameter is active (high-
lighted blue).
Tip
To select other parameters and values, perform steps 1 – 6, see
Helligkeit
ändern
.
Tip
It is also possible to switch between volume menu parameters directly via the
touch-screen. The parameter value is active by default.
1. Touch a volume menu parameter.
➯
The parameter value is active (highlighted blue).
2. Touch the scale to the right or left of the cursor to increase or decrease the
value (for
VOLUME
and
BRIGHTNESS
).
or
Touch the parameter value (for all other parameters)
➯
The parameter value changes.
13.3
Displaying an Analogue Video Signal
VIDEO IN
is configured by default as
INT
(internal), i.e. the displays show on the signal
meter are decoded from the signal at the RF input.
If
EXT
(external) is configured, the displays of the composite video input are displayed on
the measurement interface.
To display an analogue video signal:
1. Connect an analogue video signal via the Cinch socket.
2. Perform steps 1 – 3 to select
VIDEO IN
, see
Helligkeit ändern.
➯
The
VIDEO IN
value is active (highlighted blue).
3. Turn the rotary wheel to select
EXT
to display an external analogue video signal.
4. Press the rotary wheel to save the selection.
➯
The setting is saved The
VIDEO IN
parameter is active (highlighted blue).
13.4
Changing the RF IN Setting
The default setting for
RF IN
is
F (75 Ω)
. It can be switched to
Optical
to activate the opti-
cal input, see
Optische Messungen durchführen, S. 47.
To change the
RF IN
setting, see
Helligkeit ändern.