17 of 52
through the sealing gasket supplied (see Fig. E2), close the gasket and insert it into the roof gland until it reaches the
stop. Make sure that no tensile load is acting downwards on the sealing gasket as this can cause it to fall out in the
course of time.
Fig.
E1
Master coaxial cable
(marked red)
Fig.
E2
1
① = sealing gasket
Variant with External Cable Gland
1. Lay the cables supplied with the turntable (2 × coax cables and 1 x power supply cable) into the mounting plate as
indicated by the markings on the mounting plate , see Fig. F1.
2. Feed the remaining lengths of cable through a cable duct and a cable gland
¹)
into the interior of the motor home /
caravan.
3. Lift up the turntable and place it carefully on the mounting plate facing in the direction of travel, see Fig. F2. Make
sure not to step on the plug connectors and not to kink / crush the cables.
4. Align the through holes on the turntable with the threaded holes on the mounting plate.
5. Allow the turntable to rest on the front edge of the mounting plate.
6. Keep the turntable supported at an angle (see Fig. F1) and insert a suitable piece of wood underneath it.
Summary of Contents for MobiSet 4 Twin CAP 950
Page 43: ...43 of 52...
Page 50: ...50 of 52 Declaration of Conformity 15 Declaration of Conformity...
Page 51: ...51 of 52...
