78
Appendix E
–
CPLive :
Networking
Connecting
the fluxer to
your LAN
It is possible for users to access data log files from stored on the fluxer and even
to control it remotely. For these actions to be possible, the fluxer must first be
connected to your local area network (“LAN”).
1.
Turn the fluxer OFF.
2.
Connect an Ethernet cable in the Ethernet Port 1 of the HMI. It is the
Ethernet port located under the HMI, completely to the left:
3.
Connect the other end of the Ethernet cable to a working network outlet in
your building.
4.
Turn the fluxer back ON.
5.
That’s it; the fluxer should now be connected to your LAN and be provided
with an IP address.
Summary of Contents for X-FLUXER
Page 1: ...Automatic fluxer...
Page 2: ......
