72
Enable data
logging
The Data Logging feature must be activated on the fluxer, in order to record
sample identification codes (sample tracking).
1.
On your fluxer, unlock the advanced mode (see page 36).
2.
Click the global parameter button:
3.
Locate the switch located by the barcode reader icon. Press the switch so that
it lights up in green, like below:
4.
Data logging is now enabled. You may exit the window.
5.
If necessary, adjust date/time/zone on your fluxer:
a.
Click on the arrow button in the lower-right corner of the
touchscreen.
b.
Then, click on the Parameters button.
c.
Type in the passcode 111111 and press OK
d.
The third tab from the left is called “Time/date” and can be adjusted
to your local time:
e.
Press on Apply when you have entered the correct time and date.
Summary of Contents for X-FLUXER
Page 1: ...Automatic fluxer...
Page 2: ......
