49 / 72
Interior lighting
4.6.3. Ramp Buffer Chocks
Ramp buffer chocks; It is used to protect
the rear of the vehicle against collisions
when the vehicle approaches the loading
ramp.
In reefer vehicles, roller ramp buffers
and fixed ramp buffers can be placed at
the rear of the vehicle, just below the
doors.
In addition, there are buffers mounted on
the rear panel stainless frame in order to
protect the superstructure from impacts
when approaching the ramp.
Ramp buffer chocks
4.7. Panel protection plates
4.7.1. Front Panel Protection Plates
In order to protect the cooler on the front
panel, there are aluminum protection
plates (1), omegas (2) and evaporator
protector (3) on the inner surface of the
front panel. If these omegas are dam-
aged, contact the authorized service and
have them replaced.
Front panel protection plate
4.7.2. Side Panel Protection Panels
There is an impact sheet at the bottom of
the side panel that protects the side pan-
el from impacts. Optionally, impact plates
in different numbers and heights can be
offered.
Side panel protection plate
4.7.3. Rear Door Protection Plate
There is an optional protection plate (1)
on the rear door of the vehicle, which
protects the rear door from impacts.
Rear door protection plate