•
The tire should be slightly moved to-
wards outside of the vehicle.
Placing the spare wheel:
•
The tire will be slided slightly into
spare wheel holder.
•
The fixation cane (1) and pin (3) will
be attached.
•
The pin (2) will be mounted.
3.11.3.
Crane
Type
Spare
Wheel
Holder
Crane type spare wheel holder
Removing the spare wheel:
•
Remove the screws (2).
•
Mount the lever (3) and turn it coun-
terclockwise slowly. The spare
wheel will be lowered.
•
Remove the fixation parts (4) and
take the spare wheel.
Placing the spare wheel:
•
Mount the fixation parts (4) to the
tire.
•
Lift the tire upwards by turning the
handwheel (3) clockwise.
•
Turn the lever (3) clockwise and the
tire will be lifted.
•
Mount the screws (2) and fix the tire.
•
Remove the lever (3) and store in
the toolbox or cabinet.
3.11.4. Rear Entry Spare Wheel Holder
Rear entry (on bumper) spare wheel
holder with double tire carrying capacity
is optionally available.
Rear entry spare wheel holder
Lowering the spare wheel:
•
The locking mechanism (1) is
opened, and the cover (2) is
removed.
•
The cotter pin at the end of the fix-
ing handle is removed.
•
The wheel is lowered by slowly slid-
ing it towards the outside of the
vehicle.
Placing the spare wheel:
•
The wheel is slid into the spare
wheel holder.
•
Fixing handle is attached.
•
Cotter pin is attachted.
•
The cover (2) is put in place and
fixed with the help of the locking
mechanism (1).
3.12. Mudguards
Your vehicle is equipped with mudguards
and/or mudflaps which are suitable for
regulations. The water will be splashed
from the ground etc. will be minimized
thanks
to
these
mudguards
and
mudflaps.
