Landing gear view
Optionally, an aluminum landing gear
can be supplied.
Before you start to drive ope-
rations, make sure that the
landing gear is turned off (hig-
hest position).
3.6.2. Rear Landing Gear Working
Principle
Foldable or fixed type mechanical land-
ing gears are optionally offered at the
rear of the vehicle. These gears can be
opened during the loading/unloading op-
erations to fix the vehicle. Thanks to
these legs, movement caused by the air
suspension will be minimum.
When the semi-trailer is loa-
ding with heavy cargo from
the rear (forklift, pallet trucks,
you must support the rear of
the semi-trailer with the rear
landing gears.
Vehicle height (ramp height)
must not be changed with the
help of the rear landing gear.
After the vehicle is brought to
the desired height with the
help of the suspension, the
landing
gear
should
be
activated.
Before you start to drive ope-
rations, make sure that the
landing gear is turned off.
3.6.2.1. Fixed Type Rear Landing Legs
Fixed Type Rear Landing Gear
The usage of the fixed type rear landing
gear is the same as the use of the front
landing gear described in section 3.5.1.
3.6.2.2. Foldable Type Rear Landing
Gear
Foldable Type Rear Landing Gear
Activation of the foldable type of rear
landing gear.
