If you add or remove any
lamps on the vehicle, your ve-
hicle may be non-suitable for
regulations.
Vehicles with LED electrical
systems consume very low
energy. For this reason, alt-
hough there is no problem in
the system, it may cause the
failure lamp to come on in old
tractors.
Repairing operations of the
electrical system have to be
made by only authorized ser-
vices.
Otherwise,
electrical
problems may occur or your
vehicle
may
be
out
of
warranty.
3.5. King Pin
King pin is a shaft which connects truck
and railer together. Your vehicle may be
equipped with 2” or 3.5” diameter pins.
Please check the king pin diameter be-
fore connecting the truck.
If you match the truck and trai-
ler with a different diameter
king pin, injuries may occur.
The flanged king pin is used on the ve-
hicle. That’s why king pin can be re-
placed easily.
Kingpin
If the wearing on the king pin
is bigger than 2 mm, the king
pin must be replaced.
Your vehicle may be equipped with a
double king pin slot. You can remove the
bolts around the king pin and mount king
pin to the other slot. Please be careful
about the total length of the vehicle ac-
cording to country regulations and be
sure that the total length is suitable for
regulations.
3.6. Landing Gear
There is a front landing gears behind the
vehicle’s gooseneck area so that your
vehicle can stop in park without truck.
3.6.1. Front Landing Gear’s Working
Principle
The landing gear crank handle (1)
should be removed from its holder (2)
and brought to a perpendicular position
to the vehicle.
