background image

15

      Example: 21 = 2012 model year.

The third and fourth digits represent the week of the 

year.  (Ex. “01” for 1st week in Jan.) model.  

The best method for establishing warranty period is by 

keeping your original receipt.  Also register the Foun-

tain online at: 

www.kascomarine.com

Kasco Marine will have a record of the purchase and 

will be able to determine whether or not the unit still 

caries warranty coverage.

Once the warranty coverage has been established, the 

unit may be sent to any Kasco Authorized Repair Cen-

ter for evaluation and repair.  Please call Kasco Marine 

at 715-262-4488 prior to shipping.

 

Kasco Marine, Inc.

800 Deere Rd.

Prescott, WI 54021

Attn: Repairs

Or call Kasco Marine at 715-262-4488 to locate your 

nearest Authorized Repair Center.  You can also email 

Kasco at [email protected]

Note:  Only complete motor assemblies will be ac-

cepted for warranty repair.  The power cord and all 

other components must be returned with the motor 

as originally assembled.  Any missing parts will be 

replaced at the customer’s expense and, if determined 

to have caused the failure, could void the entire war-

ranty.  Some parts are essential for structural support 

during shipping and others, such as the power cord, 

are essential to properly diagnose potential causes of 

failure.  It is not necessary to return the control box or 

float with the motor assembly.

Please include the Repair Form received from Kasco 

Marine or your local distributor with the shipment.  If 

no Repair Form is available, include your name and 

physical address for return delivery of the repaired 

unit and a daytime phone number and/or e-mail ad-

dress for correspondence regarding the warranty 

claim.

Any expedited shipping method for the return of the 

unit is at the customer’s expense.  Kasco Marine will 

return units repaired under warranty at our expense via 

ground freight within the continental United States.

Warranty Policy

Warranty Period:

Model:  2400SF  - 1 years

Kasco® Marine, Inc. warrants this Fountain to be free 

from defects in material or workmanship (except for 

the ropes, power cord, and propeller) under normal 

use and service.  The Kasco Marine, Inc. obligation 

under this warranty is limited to replacing or repairing 

free of charge any defective part within the warranty 

period from the date of shipment.  Customer shall pay 

shipping charges for returning the unit to Kasco or an 

Authorized Repair Center.

 

THIS WARRANTY IS IN LIEU OF ANY 

OTHER WARRANTIES, EXPRESSED OR IM-

PLIED, AND ANY OTHER OBLIGATION OR LI-

ABILITY WHATEVER ON THE PART OF KASCO 

MARINE, INC. AND IN NO EVENT SHALL KAS-

CO MARINE, INC. BE LIABLE FOR ANY SPE-

CIAL OR CONSEQUENTIAL DAMAGES.

Warranty is void if:

•  The Fountain is not maintained properly according 

to the Maintenance Recommendations supplied in 

this Owners Manual.

•  The Fountain is returned for repair without the 

power cord or if the unit, control box, or power 

cord are altered in any way from original ship-

ment.  Cuts in the power cord are not covered 

under warranty.

•  The Fountain is damaged by unauthorized tamper-

ing.

•  The Sacrificial Zinc Anode around the propeller 

shaft shows significant deterioration.  (The Anode 

must be inspected periodically and replaced if 

necessary.)

Warranty Claim Procedure:

Check the eleven-digit serial number printed either on 

the black cover of the motor or on the blue nameplate 

and determine the year of manufacture according to 

the serial number scheme below:

Sample Serial #

21  01 S 24 1725

The first two digits represent the reverse of the last 

two digits of the year of manufacture.  

Summary of Contents for xStream 2400SF





















Reviews: