KARMETAL KMT 180 CRAFT, Operation Manual

Page: 20 / 47

20
5.2 Blade Changing Procedure
In order to achieve accurate and efficient cuts, it is important to use a sharp and correct blade
for the material to be cut.
1- Raise the saw frame to its highest position
2- Turn the hand-wheel to left to loosen the blade.
3- Switch off the main power switch of the machine.
Caution: Avoid serious injury by turning the machine's power off at the main switch before
adjusting, servicing, or cleaning the saw.
4- Open all the wheel covers on the saw frame.
5- Loosen the bolts on the carbide blade guides.
Lower the blade from bandsaw guides.