21
6-
Lower the chip brush away from the blade by loosening the chip brush locking lever.
Caution:
Wear heavy protective work gloves and safety glasses when handling blades to
avoid injury.
7-
Carefully remove the blade from the saw.
8-
Uncoil the new blade and insert the blade around the band wheels.
Warning:
New blades are generally shipped in a coiled form. This puts them under tension and
can suddenly be uncoiled. Take extreme caution to prevent injury when uncoiling the new
blade.
Make
sure
you
wear
safety
gloves
and
glasses.
Locate back of edge the blade into the carbide inserts (pressure pads) and guide bearings so
the teeth point in downward direction.
9-
Press the back edge of the blade fırmly against the back-up of the carbide guides, and turn
the bolts lightly to hold the saw blade in position
10-
Turn on the main switch of the machine.
11-
Turn the hand-wheel to right (to tensioning position) to apply a
light pressure
.
12-
Press the back edge of the blade firmly against the flange of each band wheel.
Summary of Contents for KMT 180 CRAFT
