18
5
OPERATION
In this section, the functions of the machine will described to guide the operator to become
familiar with the machine and its components.
5.1
Control Panel
The following figure shows a general view of the machine control panel. The control elements on the
panel will be described next.
Main Power Switch
When this switch is turned on, the LCD display comes on, indicating that the machine is
ready to operate.
Emergency Stop
The "Emergency stop" push button stops
all functions
of the machine. The machine will not
function until "Emergency stop button’ is released. To release the emergency button, turn it in
the direction indicated on its hub.
Caution:
The "Emergency stop" push button does not disconnect the machine from the main
power supply. To avoid from serious injury or death due to electricity shock, turn the main
power switch off or disconnect the machine from the main supply before servicing it.
Coolant Pump On/Off Button
Coolant pump can be switched on and off via this button.
Caution:
Do not run the coolant pump without coolant in the reservoir. Otherwise, the coolant
pump will be damaged.
Summary of Contents for KMT 180 CRAFT
