24
5.2.7 Driver's Seat Attachment
5.2.7.1 Place the rear of the seat into its receiving groove and then tilt the front of
the seat forward into position.
5.2.7.2 Please reverse the steps specified in the above section 5.2.5 Driver's Seat
Detachment to attach the driver's seat.
CAUTION
●The seat release lever must be in the locked position for the controller to
function. This safety sensor is designed to protect the user from having
the seat detached while in use. An error code will also flash if the seat
release lever is not in the proper position.
5.2.8 Moving the Seat Forwards or Backwards
5.2.8.1 Loosen the knob bolt under the front of the seat.
5.2.8.2 Tilt the seat back.
5.2.8.3. Loosen the four bolts under the driver's seat with the Allen Wrench
included in your KARMA Tool Kit. (See Figure 5.18)
5.2.8.4 Slide the seat forwards or backwards to the desired position. The total
range of adjustment is 10 cm.
5.2.8.5 Re-tighten the bolts.
5.2.8.6 Tilt the seat down and relighted the knob bolt.
5.2.9 Suspension Anti-tippers
Use the tool supplied in your KARMA Tool Kit to attach the suspension anti-tippers.
(See Figure 5.19)
(Figure 5.17)
(Figure 5.18)
(Figure 5.19)
(Figure 5.20)
(Figure 5.21)
