Karma Morgan M MGNM-SLN, User Manual

Page: 100 / 128

93
driving until you feel the wheelchair is hitting the end position in the docking
station. At the same time you will hear a clicking sound. The wheelchair is now
locked in to the docking station. The light on the control panel will light up de
LED showing the wheelchair is locked in correctly. Now switch the wheelchair
off.
After the wheelchair is locked in, put the car safety belt on according to the
instruction in chapter 19.3.5.
19.3.3 Unlocking procedure
To unlock the wheelchair, first open up the car safety belt. Then switch on the
wheelchair and switch to drive mode. Now push the release button of the Dahl
Docking Station. You will hear a firm click. The locking bolt is now retracted
and the wheelchair can drive in reverse direction out of the docking station.
19.3.4 Manually unlocking in case of electric failure or accident
Dahl Engineering offers two docking stations, the Mk ll, and a new power
height adjustable called Dahl VarioDock. Please also refer to Dahl
If the wheelchair is not centered correctly, it might not be possible to lock in
top the docking station. In that case, retry by driving a bit backwards and
re-center the wheelchair. Try once more until you hear the clicking sound
and you see the locked sign LED on.
Do not forget to put the car safety belts on before driving in the vehicle.
This is in order to avoid dangerous situations and personal- or wheelchair
damage.
After pushing the release button of the Dahl Docking Station, the locking
bolt is retracted for a certain period of time. After that time, the bolt will lift
up again and lock the docking station. Make sure you drive your
wheelchair out of the docking station in this time window of the unlocked
position. If not, you have to push the release button one more time.