Karma Morgan M MGNM-SLN, User Manual

Page: 47 / 128

40
11.2.9.3 Setting the angle and depth position of the hip support
To set the angle and depth of the hip support, take the following steps:
Step 1: Remove the rubber covers (P) of the friction joints.
Step 2: Loosen the friction bolts (Q) so the padding can be moved.
Step 3: Tighten the frictions bolts. Now the position is fixed.
Step 4: Put the covers back on to the friction joints.
If you loosen up the bolts too much, the hip support might start to suddenly
move. This might cause a little shock reaction on the user in the
wheelchair. It is better to loosen the bolts bit by bit and every time try to
move the hip support pad. The friction will keep it stabile. Make sure you
hold the hip support with one hand and loosen the bolt with the other hand.
P
Q
The hip support is only to be combined with the flip up armrest system.