Karma Morgan M MGNM-SLN, User Manual

Page: 96 / 128

89
5. Note that the following parts are the standard parts that come with the
complete docking station: 8 mm spacer (Dahl part no. 500673), the lock plate
(Dahl part no. 500561) and the 5 pieces of Dahl high grade steel (14.9) Torx
bolts (Dahl part no: 502800)
Mounting the Dahl docking plate on to the Morgan M Versus (MGNM-VRS)
chassis
6. After cutting the bolts to the right length, Loctite 222 needs to be added on
to the thread to secure the bolts.
7. The five Torx bolts shall be tightened with a torque wrench to the preset
torque of 16-18 Nm.
8. Place the batteries back into the chassis and connect them to the
electronics.
Now the Morgan M Versus (MGNM-VRS) chassis is ready to be docked into
the Dahl Docking Station. For the Dahl Docking Station, both Dahl Docking
Station MK II and Dahl VarioDock
™ are compatible with the Morgan M Versus
The special Dahl high grade Torx bolts (Dahl part no: 502800) only come
in one length which often is too long. They need to be cut into the right
length by the authorized engineer to fit the locking plate properly without
damaging the batteries.