15
While holding the adjustment lever in and holding on to the handlebars with both
hands; raise or lower the steering column to the desired position.
When you release the adjustment lever; the steering column will lock in place. You
may have to move the steering column slightly up or down to hear it "click" into
the locked position. (See Figure 5.12)
Figure 5.11
Figure 5.12
Starting and Driving
◎
Make sure the driver's seat is installed properly.
◎
Make sure the steering column has been secured properly.
◎
Make sure the armrests have been returned to the proper down position.
◎
Turn the ignition ON. If necessary, turn on the headlight and taillight.
◎
Check the battery indicator and make sure there is enough power for your trip(s). If you
have any doubt about the remaining power, please charge the battery before you
depart.
◎
Set the speed dial to the proper level.
◎
Be sure the variable speed levers are in good condition.
◎
Make sure the electromagnetic brake is in good working order.
◎
Always make sure that your surroundings are safe to operate the scooter.
ATTENTION
：
Do not pull both variable speed levers simultaneously, since you might not be able
to control your scooter and may cause permanent damage.
Do not turn the ignition OFF while driving, as this will lead to an abrupt stop and
possible injury.
Do not set the speed dial on high while driving indoors.
Do not adjust the speed dial while driving. A sudden change to the highest speed
may endanger you and cause failure to your scooter.
Do not place magnetic devices near the control panel as this may affect the
operation of your scooter.
Be careful while driving in heavy traffic and crowded areas.
While reversing the vehicle be aware of people and objects behind you.
