Karizma
Plus
Keypad and Entry codes
Keypads
You operate your intruder alarm system by means of a keypad. Each keypad has numeric keys (0 to 9),
ENTER and ERROR. Over each key is a label, which describes the secondary function of each key. The key
will perform their secondary function when the red FUNCTION indicator is lit.
Entry Codes
Before you can do anything with you will need to key in a code using one of the keypads.
There are several types of entry code, which permit different levels of control over the system. Check the
System Information sheet to see which codes have been enabled. The different types of codes are:
Normal
- this code allows the system to be set, unset, and reset after an alarm.
Manager
- this code has the same functions as a user code, but in addition the manager code can
add or delete all other codes, test the system, view the event log, set the time and date, omit 24Hr
points, and set the chime function.
Cleaner
- special code that unsets only part of the system providing restricted access only to
certain areas of the premises.
Duress -
a special code which although appearing to work exactly like a standard user code will
also cause the signaling device to signal a
Personal Attack
alarm to the central station. Do not use
this code unless you are under threat to set or unset the system.
Always press the
Enter
key after keying in your code or when making a selection.
